high power 20(.787) 15(.59) + + + - - - 4 60 7.30.2870.1(.004) 6.8(.268)0.1(.004) 1.5(.06) 7.85(.31) 4.5(.177) fyl fyl fyl fylp pp p- -- -5 55 5w ww w- -- -pg pgpg pgl ll l features: radiation pattern long operating life highest flux per led family in the world. available in pure green lambertian radiation pattern more energy efficient than incandescent and most halogen lamps low voltage dc operated cool beam,safe to the touch instant light (less than 100ns) fully dimmable. no uv superior esd protection eutectic die bonding rohs compliant instant light package dimensions applications reading lights (car,bus,aircraft) lcd backlights /light guides fiber optic alternative/decorative/entertainment mini-accent/up lighters/down lighters/ orientation indoor/outdoor commerclal and residentlal architect ural cove/under shelf /task bollards/security/garden portable(flashlight,bicycle) edge-lit signs (exit, point of sale) automotive exit (stop Ctail-turn ,chmsl,mirror side repeat) trafficsignaling /beacons/railcrossing and wayside. relativelumionousintensity(lop@max=1)
high power typical optical/electrical characteristics@tj=25 item symbol condition min typ max unit forwardvoltage vf if=1.2a 3.2 4.2 v reversecurrent ir vr=5v 50 ua 50%powerangle 2 1/2 if=1.2ma 100 110 120 deg luminousintensity v if=1.2ma 130 150 lm recommendforwardcurrent if 1.2 a wavelength d if=1.2a 520 525 nm thermalresistance,junctionto case rjp if=1.2a 18 /w notes: 1. tolerance of measurement of forward volt age 0.1v 2. tolerance of measurement of peak wavelength 2.0nm 3. tolerance of measurement of luminous intensity 15%. absolute maximum rating item symbol absolute maximum rating unit forwardcurrent if 1.2 a peakforwardcurrent* ifd 1.3 a reversevoltage vr 5 v powerdissipation pd 5 w electrostaticdischarge esd 4500 v operation temperature t opr 30 to+80 storagetemperature t stg 40 to+100 leadsolderingtemperature* t sol 260 for3secondsmax ifp conditions :pulse width 10 msec duty1/10 all high power emitter led products mounted on alum inum metal-core printed circuit board, can be light ed directly ,but we do not recommend lighting the high power products for more than 5 seconds without a directly,but we do not recommend lighting the high powe products for more than 5 seconds without a appropriate heat dissipation equipment. re-flow, wave peak and soak-stannum soldering etc. is not suitable for this products. sueggest to solder it by professional high power le d soldering machine. can use invariable Ctemperature searing-iron with s oldering condition: 260 degreen less than 3 seconds.
high power typical optical/electrical characteristics curves ( tj=25 unless otherwise noted)
|
